Αποτρεπτικό διαρροών λαδιού κινητήρα αυτοκινήτου 325ml.

• Σταματά διαρροές λαδιού χωρίς αποσυναρμολόγηση του κινητήρα.
• Αναζωογονεί τις φλάντζες.
• Για κάθε τύπο μηχανής

Δε διορθώνει μηχανικές βλάβες. Αβλαβές στους καταλύτες. Συμβατό με όλα τα πρωτογενή και συνθετικά λάδια κινητήρων εσωτερικής καύσης, κατάλληλο για κανονικές και χαμηλής περιεκτικότητας σε θειική τέφρα, φώσφορο και θείο (low saps) εφαρμογές.

Οδηγίες: Προσθέστε μία φιάλη 325ml σε ποσότητα λιπαντικού κινητήρα μέχρι 6 λίτρα.

Περιεκτικότητα 325ml

Κατασκευάζεται στο Βέλγιο

Stops leaks in the radiator and in the cooling system. Facilitates the cooling. Prevents the formation of rust. Doesn't affect metal and rubber.

High quality tool for starting problems with internal combustion engines.

Effective tool to clean engines. Engine cleaner has high dissolving properties and leaves no residue. Non-conductive and non-corrosive.

- Cleans descales the radiator
- Restores thermal performance
- Avoid the risk of overheating
Specific formulation to effectively clean the engine cooling system (radiator, water pump, thermostat ...) and the cabin heating circuit. Dissolves and disperses sludge, scale, and rust that interfere with proper cooling of the engine. Restores the proper functioning of the circuit and heat exchange. Avoid the risk of overheating (eg cylinder head gasket, galling, hoses ...). Avoids the loss of coolant by accidental degassing of the circuit overheating.
RECOMMENDATIONS: For optimum performance, clean the cooling system before each periodic drain. Treatment for garage owners and transport professionals, individuals, industry ... For engines of car, motorcycle, truck, generator ... This bottle 250ml can efficiently clean a circuit up to 10L of capacity.
COMPATIBILITY: Compatible with all liquid-cooled engines, and all types of coolants. Formula acid-free, non-corrosive, safe for engine components.
Bottle 250ml (net)

- Protects against corrosion by water and contaminations by bacteria
- Less consumption
- Less black smoke
Synthetic additive to clean and protect the entire fuel system and diesel injection. Prevents clogging of the pump, injectors, combustion chambers and the EGR valve. Stops the loss of engine power due to daily fouling, makes the engine more flexible and more efficient. Consumption, polluting emissions and black smoke are reduced. This treatment fights and protects diesel against the deterioration and contaminations caused by water and bacteria. It protects the injection system from oxidation and corrosion, reduces the risk of seizure.
RECOMMENDATIONS: To use preventively every 5000kms, even on a new vehicle. For garages, individuals, transport professionals, industrialists, TP (generators ...). Especially recommended for short-haul vehicles used in the city, and for low-speed vehicles. A bottle (200ml) can effectively treat 50 to 70L of fuel.
COMPATIBILITY: For any diesel engine, old or new generation, whatever the mileage, whatever the type of injection (common rail, high-pressure, pump-injectors ...) with or without turbo, with or without pot catalytic, with or without a particulate filter.
Bottle 200ml (net) + cannula

Additive for fluidizing diesel fuel at very low temperature. Protects the risk of failure by delaying the formation of paraffin crystals that clog the lines and the fuel filter. Protects effectively up to -30 ° C. Pro-cetane reinforced formula, facilitates the engine start in cold weather, makes the engine more flexible and reduces pollutant emissions.
One-dose bottle 200ml: 1 bottle for 1 full of fuel (50-70L)
Comes with the cannula.

- ARS technology
- Allows the use of SP95 or SP98 in older engines
- Compatible cars GPL
This lead substitute allows the use of unleaded fuel (SP95, SP98) in engines designed to run on Super or leaded gasoline. It effectively and durably protects the valve and valve seats by depositing a lubricating film and very resistant. It eliminates the phenomenon of premature recession of valve seats, maintains their seal, and protects against the risk of seizure. On bi-fuel engines it compensates for the lack of lubrication by LPG and significantly reduces the risk of seizure related to the use of this fuel.
RECOMMENDATIONS: At each fill. For use by professionals and individuals. For cars, motorcycles, vintage cars and historic competition, motorized farming, power boating ... This bottle (250ml) can efficiently treat 250 liters of gasoline (10ml of additive for 10L of fuel).
COMPATIBILITY: For all vehicles with old-generation 4-stroke gasoline engine designed for leaded gasoline, or gasoline-LPG biofuels. Whatever the mileage, with or without turbo, fueled by injection or carburetor (s). Compatible with all species marketed in Europe. Non-corrosive, safe product for fuel system components.
250ml measuring bottle (net)

- Cleans valves and cylinder heads
- Restores engine performance
- Restores the consumption of gasoline
The petrol engine valve cleaner is a specific formulation, highly concentrated, to quickly remove varnish and deposits (calamines ...) accumulated on the valves and in the combustion chambers. It restores the filling rate of the cylinders, improves the quality of the combustion, thus optimizing the efficiency of the engine. The engine regains performance and flexibility. Consumption and polluting emanations are reduced. Hot spots in the firebox are eliminated, reducing the risk of rattling or self-ignition. Protects and keeps the fuel system clean.
RECOMMENDATIONS: Before the transition to the Technical Control, or preventively every 4000 to 5000kms, or in a curative way at the first signs of loss of performance. A bottle (200ml) can effectively treat 50 to 70L of fuel.
COMPATIBILITY: For any 4-stroke petrol engine, new or old, whatever the mileage, with or without turbo, with or without catalytic converter, fueled by carburetor (s) or injection (including direct injection). Compatible with all species marketed in Europe, including the SP95-E10. Non-corrosive, safe product for the components, plastics and rubbers of the fuel system.
Bottle 200ml (net) + cannula