Lubricants - Greases
Rustyco Rust Solvent Gel 5 Liter
€120.00Liquid sandpaper. Removes rust pore-deep 100%. No blasting or sanding. Easy to use and environmentally friendly
INSTRUCTION FOR USE
First remove any loose rust, dirt, grease and oil. Apply a thick layer of gel with a brush. Make sure that the gel does not dry out, so that it can fully absorb the rust. Let the gel settle (at least 30 minutes), preferably at room temperature. If necessary, repeat treatment for high levels of rust. Can be cleaned with water, finish immediately afterwards.
Tip1: Speed up the process by using a steel brush to rub the gel into the rust.
Tip2: Cover large areas with foil if necessary, so that the gel does not dry out.
Rustyco Rast Remover 1 Liter
€33.00Liquid sandpaper. Removes rust pore-deep 100%. No blasting or sanding. Easy to use and environmentally friendly.
INSTRUCTION FOR USE
First remove any loose rust, dirt, grease and oil. Prepare a solution with water. Add at least 50ml of Rustyco to 1 litre of water (room temperature) for low levels of rust (surface rust). Add more Rustyco for high levels of rust and use it undiluted if necessary. Fully submerge the object (at least 30 minutes). You may need approximately 72 hours to remove high levels of rust. Take the object out of the solution on a regular basis,, brush off any loose rust, rinse with water and put it back. This will speed up the process. Objects that cannot be submerged must be treated with RUSTYCO ®-GEL
Learn MoreRustyco Rust Solvent Gel 1 Liter
€30.00Liquid sandpaper. Removes rust pore-deep 100%. No blasting or sanding. Easy to use and environmentally friendly
INSTRUCTION FOR USE
First remove any loose rust, dirt, grease and oil. Apply a thick layer of gel with a brush. Make sure that the gel does not dry out, so that it can fully absorb the rust. Let the gel settle (at least 30 minutes), preferably at room temperature. If necessary, repeat treatment for high levels of rust. Can be cleaned with water, finish immediately afterwards.
Tip1: Speed up the process by using a steel brush to rub the gel into the rust.
Tip2: Cover large areas with foil if necessary, so that the gel does not dry out.
PROTECTON COPPER GREASE 400ML (1890711)
€20.00Spray with a high copper content to lubricate screw connections which are exposed to very high temperatures. High thermal stability. Prevents wear and sticking. Resistant to chemicals and weather influences. Rust preventive.
Learn MoreFACOM Steering fluid 500ml (006030)
€15.00FACOM power steering fluid 500ml, a high-performance hydraulic fluid used in power steering systems and automatic gearboxes. Formulated to answer the needs of modern vehicles whose weight and performance push the envelope of their lubricants. Effectively combats wear and corrosion in circuits. Reduces noise and avoids the buildup of foam and deposits.
Learn More
For topping up or complete replacement of power steering systems and automatic gearboxes in utility and industrial vehicles. Fluid conforms to DEXRON III specifications. May be used with DEXRON II
ATTENTION: Do not mix with green fluid.
Conforms to the following manufacturers specifications -
General Motors Dexron III (G-34193) ; Ford MERCON ; M.B. 236.1, 236.5, 236.10, 236.11 and 236.12 ; Volvo 97341-12 ; ZFTE-ML 02F, 03D, 04D, 14A, 17C and 11B ; MAN 339 type Z-1 and V-1 (ex type F); Allison C4 (C4-22452596) ; Voith 55.6335.20 (ex G 607) DIWA D85.., D86..and D502.
Container 500ml (net) with security plug
Colour: redRustyco Rust Solvent Gel 50 ml
€15.00Liquid sandpaper. Removes rust pore-deep 100%. No blasting or sanding. Easy to use and environmentally friendly.
INSTRUCTION FOR USE
First remove any loose rust, dirt, grease and oil. Apply a thick layer of gel with a brush. Make sure that the gel does not dry out, so that it can fully absorb the rust. Let the gel settle (at least 30 minutes), preferably at room temperature. If necessary, repeat treatment for high levels of rust. Can be cleaned with water, finish immediately afterwards.
Tip: Speed up the process by using a steel brush to rub the gel into the rust.
Learn MoreFACOM Silicone grease 300ml (006101)
€13.50'Clean' (colourless) silicone grease for positioning, lubricating and protection of gaskets and seals.
Learn More
Its high adhesion combined with its working consistency makes it a high performance and long lasting grease. Provides effective protection against moisture and dust penetration. Protects rubber seals against drying out or freezing.
High adhesion on all materials. High pressure lubricant. Non-running and odourless after application. Water repellent, waterproofing. Water resistant and weatherproof. Chemically inert, safe for plastics and rubber. Good thermal conductivity. '360º' Aerosol, may be used in all positions.
EXAMPLES OF USE: Positioning and pre-lubricating of mechanical seals (elastomeric seals, metal-plastic laminates, etc.). Lubrication and protection of seals subject to spray or water immersion (valves, glands, faucets ). 'Clean' lubrication in the textile or paper industry...
Also on metallic mechanisms. Waterproofing and anti-drying for rubber (tubing, wiring harnesses, etc.).
300 ml (net) aerosol, extension tubeFACOM Marine grease 300ml (006110)
€13.00FACOM marine grease 300ml; a new generation of Calcium Sulphonate grease. The high-performance qualities are particularly suitable to treat mechanisms exposed to marine environments, immersion in water or steam. This grease has a remarkable level of adhesion and resistance to washing. Possesses excellent anti-wear properties assuring long service life. Gives a high level of protection against corrosion.Temperatures in use : -20°C à +140°C (continuous) / +170°C (momentary). Grade NLG I/2. Colour: translucent beige
Learn More
Aerosol 300ml (nett) with extensionFACOM Penetrating grease 300ml (006102)
€13.00High performance grease for assembly and maintenance. Its powerful penetrating action facilitates lubrication of previously assembled or inaccessible mechanisms. It adheres well to metal and permanently protects against wear and corrosion. Reduces overheating and friction between moving parts. Light and stringy. Resists shear, excellent working consistency. Water repellent.
Learn More
EXAMPLES OF USE: Main grease and for regular maintenance in industry and for professional mechanics. For mechanisms under low and moderate load, operating at zero to high speeds. In dry or wet environments.
Joints (automobile hinges, motorized doors, links, motorcycle stands, etc.) Gearing
(reducers, etc.). Ball bearings, bushings, slideways. Steel chains and cables. Positioning fasteners, studs and for corrosion protection
300 ml (net) aerosol, extension tubeFACOM Mechanical grease 200g (006105)
€12.00High performance lithium grease, for assembly and as a general mechanic's grease. Adheres strongly to metal and has great high pressure and anti-wear power. Suitable for applications under medium and heavy loads, at all speeds. Resists repetitive shocks and difficult working environments (dust, humidity, etc.). Grade: NLGI2.
Learn More
- High adhesion
- Stringy
- High pressure and anti-wear, resists shearing
- Very good consistency at speed
- Completely insoluble in water
- Very good weathering resistance in work and in storage
- Protects against corrosion
- 'Safety' grease may temporarily exceed its dropping point (>180 ºC) and re-form with no consequence upon cooling
EXAMPLES OF USE: Industry (assembly, maintenance, repair), professional mechanics (transport, automobile, 2 wheels) Examples: bushings, joints, ball and roller bearings, racks, hinges, gearing, etc. Universal joints and constant velocity joints on automobiles. Also suitable for greasing plastic mechanisms
200gr Tube (net)