Liquid sandpaper. Removes rust pore-deep 100%. No blasting or sanding. Easy to use and environmentally friendly.

INSTRUCTION FOR USE

First remove any loose rust, dirt, grease and oil. Apply a thick layer of gel with a brush. Make sure that the gel does not dry out, so that it can fully absorb the rust. Let the gel settle (at least 30 minutes), preferably at room temperature. If necessary, repeat treatment for high levels of rust. Can be cleaned with water, finish immediately afterwards.

Tip: Speed up the process by using a steel brush to rub the gel into the rust.

Liquid sandpaper. Removes rust pore-deep 100%. No blasting or sanding. Easy to use and environmentally friendly

INSTRUCTION FOR USE

First remove any loose rust, dirt, grease and oil. Apply a thick layer of gel with a brush. Make sure that the gel does not dry out, so that it can fully absorb the rust. Let the gel settle (at least 30 minutes), preferably at room temperature. If necessary, repeat treatment for high levels of rust. Can be cleaned with water, finish immediately afterwards.

Tip1: Speed up the process by using a steel brush to rub the gel into the rust.

Tip2: Cover large areas with foil if necessary, so that the gel does not dry out.

 Liquid sandpaper. Removes rust pore-deep 100%. No blasting or sanding. Easy to use and environmentally friendly.

INSTRUCTION FOR USE

First remove any loose rust, dirt, grease and oil. Prepare a solution with water. Add at least 50ml of Rustyco to 1 litre of water  (room temperature) for low levels of rust (surface rust). Add more Rustyco for high levels of rust and use it undiluted if necessary. Fully submerge the object (at least 30 minutes). You may need approximately 72 hours to remove high levels of rust. Take the object out of the solution on a regular basis,, brush off any loose rust, rinse with water and put it back. This will speed up the process. Objects that cannot be submerged must be treated with RUSTYCO ®-GEL